1044 Pioneer Way Suite F El Cajon, CA 92020
Tel: (619) 579-1762      Fax: (619) 579-1764

©2017 Clearly Superior Technologies, Inc. Laser Trackballs


How to Replace L-Trac Rollers

Step 1:

           Phillips Screw Driver. One screw is located under the Service Label.

Step 2:

            remove the three current rollers from their holders by simply pulling on them.

Step 3:

           on a brown bearing. Make sure the nose of the bearing is facing toward

           the contact points of the roller.

Step 4:

             Note that the long part of the brown bearing goes downward in the holder

            and be sure to press down on each bearing to make sure they are completely seated.

Step 5:

           on the bottom half and re-screw the three screw back on. Make sure not to

           over tighten the screws.